This coursework contains 26 videos with a duration of approximately 11 hours. All the videos are about CFD analysis and Optimization using SolidWorks. The videos are about industry specific problems, represented in a simple manner with simpler examples. This course is made keeping in mind about the intermediate & advanced learners. In this course-work important CAD models have also been provided as resources for users practice purpose. The course is divided into six different units.
Unit 1 contains 4 videos with a detailed CFD analysis of HVAC systems in a correct sequence. In this case analysis will be carried out at different stages from condenser to Dryer, to expander to Evaporator.
(i) CFD Analysis of an HVAC Condenser using SolidWorks 2021
(ii) CFD Analysis of HVAC Evaporator using SolidWorks 2021
(iii) CFD Flow Simulation through an HVAC Drier using SolidWorks 2021
(iv) CFD Flow Simulation through an HVAC Expander using SolidWorks 2021
Unit 2 contains contains 4 videos with different applications of Heat Pipe to analyze and optimize CFD problems
(i) CFD Analysis of an Evacuated Tube Solar Collector
(ii) CFD Analysis of Laptops with Heat Pipes using SolidWorks 2021
(iii) CFD Conjugate Heat Transfer Analysis with Heat Pipes using SolidWorks 2021
(iv) CFD Parametric Study & Optimization of Exhaust Gas with Heat Pipe -SolidWorks 2021
Unit 3 contains 5 videos with CFD Analysis of different types of Heat Exchangers.
(i) CFD Analysis of a Cross Flow Heat Exchanger using SolidWorks 2021
(ii) CFD Analysis of a Plate Heat Exchanger with SolidWorks 2021
(iii) CFD Analysis of a shell tube heat exchanger using SolidWorks 2021
(iv) CFD Analysis of a Surface Condenser using SolidWorks 2021
(v) CFD Analysis of a Counter Flow Heat Exchanger using SolidWorks 2021
Unit 4 contains 7 videos with CFD Analysis and optimization of homogeneous and heterogeneous fluid mixing.
(i) CFD Flow Simulation & Particle Study of a Cyclone Separator with SolidWorks 2021
(ii) CFD Flow Simulation through a Duct of varied cross section using SolidWorks 2021
(iii) CFD Forced Convective Heat Transfer with Perforated Plates using SolidWorks 2021
(iv) CFD Parametric Study & Optimization of Multiple Fluid Mixing Using SolidWorks
(v) CFD Transient Analysis of Fluid Mixing using SolidWorks 2021
(vi) Fluid Mixing using SolidWorks Flow Simulation
(vii) Heterogenous Fluid Mixing with CFD Free Surface Technique using SolidWorks 2021
Unit 5 contains 3 videos with CFD Analysis and Optimization of Exhaust Gas analyzer.
(i) CFD Analysis & Optimization of a Catalytic Converter with SolidWorks 2021
(ii) CFD Analysis of an Exhaust Gas System of Petrol Engine using SolidWorks 2021
(iii) CFD Parametric Study and Optimization through multiple port Exhaust Manifold
Unit 6 contains 3 videos with CFD Analysis and Optimization of different applications relevant to convection and radiation.
(i) CFD Analysis & Optimization of an Electrical Kettle - SolidWorks 2021
(ii) CFD Flow Simulation through an Electrical Bulb using SolidWorks 2021
(iii) Convection using SolidWorks Free Surface Technique
