Prepare your STL Teeth Model File for Printing By make important Changes in the Model using Software called Meshmixer.

in this Course we will Learn :

1 - Move - Rotate - Change Scale for the Tooth STL Model or Guide.

2 - Cut the Excess Material in the teeth model or the guide.

3 - Close the Holes in your STL Tooth Model.

4 - Make a Teeth Virtual Extraction for STL Model.

5 - Make Hollowing to the Tooth Model and Test Strength.

6 - make a Good Base for your STL Teeth Model.

- you will Learn how to Move the STL Model and Changes its Original Orientation in the X Y Z directions .

- you will Learn also how to Rotate the Teeth Model 180 degree to make any Process easily on the model.

- we will learn how to use many tools like Plane cut tool that we use for cutting all the extra material in the model or the Surgical Guide.

- We will learn How to close the Holes in the model So it could be printed easily without errors.

- We will learn How to make a virtual extraction for the tooth we want in the model By Choosing the tooth and make some instructions to make right Virtual Extraction.

- We will learn also by Hollowing the model we can save 75 % of the material consumed on the printing.