"Ultimate Electrical Substations, Generation and High Voltage Course Bundle for Electrical Engineering"

The only course bundle out there with everything you need to know about electrical substations, generation of electricity, and high voltage generation

If you've been looking for ONE COURSE BUNDLE with in-depth insight into the basics of electrical substations, electrical generators, and high voltage generation, take this bundle.

First Course "Complete Electrical Substations For Electrical Power Engineering"

What are you going to learn?​

• Function, classification, and voltage of electrical substations

• Main components like power transformers, conductors, insulators, switch gears, current transformer, capacitor voltage transformer, and voltage transformer

• Different types of circuit breakers, relays, and their classification according to time, construction, and function

• Learn the difference between circuit breaker and fuse, in addition to their applications

• Understand the definition of IP or ingress protection

• Grounding system including the effect of current on the human body and components of the grounding system

• Types of electric hazards and classification of the earthing systems

• Measuring the earthing resistance by Megger and the three-point method

• Design of an earthing system using ETAP program

• Ring main unit and its importance in the electrical power system

• Types of switches used in the electrical power systems and substations

• Overhead transmission lines, underground cables, and the difference between them

• Busbars in the power system, their importance, their different schemes, and how to select them

• Lightning arrester and wave trap which are used in substations

• Air and gas-insulated substations

• Overview of the design of an electrical substation and single line diagram of 66/11 kV substation

Second Course "High Voltage Generation For Electrical Engineering"

What are you going to learn in this course?

• Types of high voltages occurring in an electrical system.

• ​Methods used to generate high voltage AC at power frequency.

• ​How to generate high voltage AC at high frequency for simulating switching actions on our electrical equipment.

• ​Definition of impulse waveform in the electrical system.

• ​Methods of generating high voltage impulses to test our equipment.

• ​Different methods used to generate very high DC voltage in electrical systems in addition to voltage doubler circuits and multiplier circuits.

Third Course "Complete Generation Course For Electrical Engineering"

• How electricity is generated.

• Different types of electrical generators

• Types of induction and synchronous generators used

• Types of electrical power plants such as hydroelectric, wind, solar, geothermal, and nuclear power plants

• Principle of operation of each generating power plant

• Types of wind turbines

• Rotor solidity and selection of the number of rotor blades

• Gearbox in wind turbines

• The power extracted by the turbine from the wind

• Betz limit and maximum rotor efficiency

• Factors affecting wind speed and density

• Applied force on the wind turbine, torque coefficient, and the importance of the TSR

• Wind turbine generator characteristics

• Effect of the rotor diameter and generator size on power

• Wind turbines spacing

• The fundamentals of solar energy

• Components and design of on-grid and off-grid solar systems

• Types and selection of solar modules

• Types of charge controllers

• Types of different solar inverters

• Selection of suitable tilt angle and shading effect in PV systems

Thank you and hope to see you in our course bundle :)