لكورس يحتوي علي شرح جميع مهام مهندس المكتب الفني لشركات المقاولات مثل :

Session 1 ‐ Introduction :

1 –What are project main elements ?

2 –What is sub contractor ?

3 –What is project baseline and what is its purpose ?

4 – How to understand project baseline .

5 – Brief on each role in contracting companies “Organization chart” .

6 – Brief on main tasks of technical office engineer .

7 – How contractor awarded the contract .

8 –What is IFC documents components ?

1st Task ‐ Preparing drawing list :

1 –What are drawing list and what is its purpose?

2 –What is the purpose of drawing list?

Session 2 – 2nd Task– Preparing shop drawings :

‐ 1ST : Shop drawing of lighting system

A – How to control lighting system ?

B –What is 1st , 2nd and 3rd fix of lighting system ?

C – what is filling ratio ?

D – what is hatchmark ?

E – How to start and finalize lighting shop drawings .

F – How to prepare lighting installation details .

Session 3 – 2nd task – Preparing shop drawings :

‐ 2nd : Shop drawing of power system .

A – How to start and finalize power shop drawings .

B – How to prepare power installation details .

‐ 3rd : Shop drawing of AC power system .

A – How to start and finalize power shop drawings .

B – How to prepare power installation details .

Session 4 – 2nd task – Preparing shop drawings :

‐ 4th : Shop drawing of cable routing.

A – Understanding first fix of cable routing system.

B –What is the difference between cable trays , trunks and ladders ?

C – How to prepare shop drawing of cable routing system .

D – How to prepare installation details of cable routing system .

E – what is builder work plan and how to prepare it .

F – Brief on shop drawings of infrastructure works .

G – Equipment furnishing .

Session 5 – 2nd task – Preparing shop drawings :

‐ 5th : Shop drawing of fire alarm system.

A –Understanding fire alarm system components .

B – Reading riser diagram of fire alarm system .

C – How to prepare shop drawing of fire alarm system .

D – How to prepare installation details of fire alarm system .

E –what are interfaces required for fire alarm system ?

F –What is cause and effect matrix ?

‐ 6th : Shop drawing of Access control system.

A –Understanding access control system components .

B – Reading riser diagram of access control system .

C – How to prepare shop drawing of access control system .

D – How to prepare installation details access control system .

E –what are interfaces required for access control system ?

F –What is biometric and time attendance system ?

Session 6 – 2nd task – Preparing shop drawings :

‐ 7th : Shop drawing of Active and passive system.

A – Understanding active and passive system components .

B – Reading riser diagram of active and passive system .

C –How to prepare shop drawing of active and passive system .

D – How to prepare installation details of active and passive system .

E –what are interfaces required for active and passive system ?

‐ 8th : Shop drawing of CCTV system.

A – Understanding CCTV system components .

B – Reading riser diagram of CCTV system .

C –How to prepare shop drawing of CCTV system .

D – How to prepare installation details CCTV system .

E –what are interfaces required for CCTV system ?

F –What is the difference between analogue and IP CCTV system ?

Session 7

3rd task – Preparing material submittal form (MSF):

A – Understanding what is MSF .

B –What are the main components of MSF .

C – How to prepare MSF .

C –What are possibilities of MSF submittal ?

4th task – Preparing quantity takeoff :

A – Understanding what is quantity takeoff .

B ‐ How to prepare quantity takeoff .

5th task – Preparing MSR:

A – Understanding what is MSR .

B ‐ How to prepare MSR .

6th task – Preparing Quantity survey :

A – Understanding what is Quantity survey .

B –What is the purpose of quantity survey ?

7th task –Applying invoices :

A – Understanding what are types of invoices .

B – Understanding types of payments of project .

C– How to prepare invoices .

8th task – Submitting RFIs & RFPs:

A – Understanding what is RFI .

B– Understanding what is RFP .

C –What are the results of RFI or RFP ?

Session 8

9th task – Preparing variation orders (VOs):

A –Understanding what is VO .

B –What is the purpose of VO ?

C –What are the components of VO ?

4 –What is cost assessment ?

10th task – Preparing As built drawings :

A –Understanding what are as built drawings .

B – Understanding what is the purpose of as built drawings .

C – How to prepare as built drawings .

11th task – Preparing O&M manual :

A –Understanding what is O&M manual .

B– Understanding what is purpose of O&M manual .

C –What are the main components of O&M manual ?

12th task – Preparing Final invoice :

A –Understanding what is final invoice .

B– Understanding what is purpose of final invoice .

C –What is TOC ?

بالاضافة الي العديد من المعلومات التي تهم جميع مهندسين الكهرباء الذين يعملون في قطاع الانشاءات عموما و شركات المقاولات خصوصا مثل :

معرفة المكونات الرئيسية لاي مشروع هندسي , معرفة ال organization chart لشركات المقاولات في الموقع ,معرفة طرق المحاسبة المختلفة ,

الكورس نظري و عملي ايضا و مفيد لحديثي التخرج و جميع المهندسين

الكورس شامل جميع ال slides التي تم الشرح عليها طوال مدة الكورس